Install the certificate from Here
Next Double click on the Zip File and Install the Certificate
Just click Next through to the
Finish button
Next is to copy the Certificate to the other store in
windows. This has to be done for every
computer that will be talking to PC Charge, Including the computer that has PC
Charge On it.
Next go to Start > Run > type MMC Press enter. Windows vista /7 type MMC in the search box
OR (Hot-Key Windows Flag + R works for all versions of windows) answer
YES to any boxes the popup asking if it is ok to run MMC applies to windows
vista / 7 only
Next In the Console window that popped up click on File >
Add/Remove snap-in …
Now in the add or remove snap-ins window Click on
Certificates then click ADD > in the middle of the window. Now in the Certificates snap-in window that
popped up click finish.
You will now be back to add or remove snap-ins window,
Certificates should still be highlighted.
Now click on the ADD> button but this time clicking on
the Computer account button, Then Next > Do Not changing any other settings
in the next window that popped up click Finish.
You will now be back to the add or remove snap-ins window
and on the Right you will see Certificates – Current User and Certificates
(Local Computer)
Now Click OK
Now you will see Certificates – Current User and
Certificates (Local Computer) side by side in 2 Panels
The next few steps you will
be working in the left side ONLY.
Next double click on
the Certificates – Current User > Personal > Certificates
Now in the Right panel
Right click on PCChargeDefaultCertificate-CA select copy.
Now back in the Left panel at the bottom double click on
Certificates (Local Computer) > Personal > Now Right click in the panel to the right and
Select paste. If you do not see paste
you need to repeat the above steps to copy the Certificate to the other store
Again this process has to be done for EVERY station that
will be processing credit cards.
Next open up PC Charge from the System Tray Icon. (If it is not there then PC Charge is not
running. Click on the pc charge Icon in the programs menu to start
it.)
Log in with the SYSTEM or MANAGER account In PC Charge
At the top click on Setup > Configure System >
Advanced > Configure IP settings
Next Uncheck enable Standard TCP/IP configuration and Check
enable secure TCP/IP configuration. Click on the dropdown for store Location and select Local Machine Then click on Store Name drop down and select MY. Now Click Display Store And Click on the PCChargeDefault From the list. Leave the default port that is listed, And click apply
Click File (at top Left)> logoff and minimize.
Next go in to Artisan > System Administration > Configuration
Settings > Business & Financial Settings >
Payment & Tender Settings > Payment Processing Settings (this station)
Next change processing method to (4) PCCharge Payment Server
5.9.1 or later (by Verifone)
Change server name or IP address to the computer that has PC
Charge. If this is the only computer or
the computer that has PC Charge on it,
Leave set to localhost.
Fill in the account number from the bottom of PC Charge, and
also the 4 digit processor abbreviation.
User Name can be left as is, if more than one station Each
station will need its own user name, i.e. User2
This does require additional user Licenses from VeriFone.
Repeat The above steps on Each station that will be
processing credit cards.
If Artisan gives any error related to sim.dll .Net 3.5 will need to be installed. This can be found Here